Oracle 1z0-593 덤프데모

ITExamDump는 IT인증자격증을 취득하려는 IT업계 인사들의 검증으로 크나큰 인지도를 가지게 되었습니다. 믿고 애용해주신 분들께 감사의 인사를 드립니다. Oracle 1z0-593덤프도 다른 과목 덤프자료처럼 적중율 좋고 통과율이 장난이 아닙니다. 덤프를 구매하시면 퍼펙트한 구매후 서비스까지 제공해드려 고객님이 보유한 덤프가 항상 시장에서 가장 최신버전임을 약속해드립니다. Oracle 1z0-593덤프만 구매하신다면 자격증 취득이 쉬워져 고객님의 밝은 미래를 예약한것과 같습니다.

인테넷에 검색하면 Oracle 1z0-593시험덤프공부자료가 헤아릴수 없을 정도로 많이 검색됩니다. 그중에서ITExamDump의Oracle 1z0-593제품이 인지도가 가장 높고 가장 안전하게 시험을 패스하도록 지름길이 되어드릴수 있습니다.

ITExamDump 의 Oracle인증 1z0-593덤프는Oracle인증 1z0-593시험에 도전장을 던진 분들이 신뢰할수 있는 든든한 길잡이 입니다. Oracle인증 1z0-593시험대비 덤프뿐만아니라 다른 IT인증시험에 대비한 덤프자료도 적중율이 끝내줍니다. Oracle인증 1z0-593시험이나 다른 IT인증자격증시험이나ITExamDump제품을 사용해보세요.투자한 덤프비용보다 훨씬 큰 이득을 보실수 있을것입니다.

ITExamDump에는 전문적인 업계인사들이Oracle 1z0-593시험문제와 답에 대하여 연구하여, 시험준비중인 여러분들한테 유용하고 필요한 시험가이드를 제공합니다. 만약ITExamDump의 제품을 구매하려면, 우리ITExamDump에서는 아주 디테일 한 설명과 최신버전 최고품질의자료를 즉적중율이 높은 문제와 답을제공합니다.Oracle 1z0-593자료는 충분한 시험대비자료가 될 것입니다. 안심하시고 ITExamDump가 제공하는 상품을 사용하시고, 100%통과 율을 확신합니다.

시험 번호/코드: 1z0-593

시험 이름: Oracle (Oracle Real Application Clusters 11g Essentials)

ITExamDump의Oracle인증 1z0-593시험대비 덤프는 가격이 착한데 비하면 품질이 너무 좋은 시험전 공부자료입니다. 시험문제적중율이 높아 패스율이 100%에 이르고 있습니다.다른 IT자격증에 관심이 있는 분들은 온라인서비스에 문의하여 덤프유무와 적중율등을 확인할수 있습니다. Oracle인증 1z0-593덤프로 어려운 시험을 정복하여 IT업계 정상에 오릅시다.

Oracle 1z0-593인증시험에 응시하고 싶으시다면 좋은 학습자료와 학습 가이드가 필요합니다.Oracle 1z0-593시험은 it업계에서도 아주 중요한 인증입니다. 시험패스를 원하신다면 충분한 시험준비는 필수입니다.

1z0-593 덤프무료샘플다운로드하기: http://www.itexamdump.com/1z0-593.html

NO.1 Which of these is not recommended as the basis for an ASM disk in a shared storage
configuration?
A. Raw disk partition
B. NFS file
C. Raw logical volumes
D. iSCSI targets
Answer: A

Oracle   1z0-593 pdf   1z0-593자격증   1z0-593
Explanation:
*Block or raw devices are not supported by Oracle Universal Installer (OUI) or Database
Configuration Assistant (DBCA). However, manually configured raw or block devices are supported
by Oracle, but not recommended.
* Shared disk access requires some sort of networked storage
-
iSCSI (not D)
-
Fibre Channel/SCSI
-
NFS (not B)
*A logical volume issupported in less complicated configurations where a logical volume is mapped
to a LUN, or a logical volume uses disks or raw partitions.

NO.2 Choose two options that are not suitable for shared storage in a RAC 11g Release 2 database
created using DBCA.
A. Block device
B. Raw device
C. ASM
D. CFS
Answer: A,B

Oracle최신덤프   1z0-593 dumps   1z0-593   1z0-593
Explanation:
Before you use DBCA to convert a single-instance database to an Oracle RAC or an
Oracle RAC One Node database, ensure that your system meets the following conditions:
/ It is a supported hardware and operating system software configuration.
/ It has shared storage: either Oracle Cluster File System (CFS) (not D) or Oracle ASM (not C) is
available and accessible from all nodes. On Linux on POWER systems, ensure that GPFS is
available and accessible from all nodes.
/ Your applications have no design characteristics that preclude their use with cluster database
processing.
Note:
*DBCA (Database Configuration Assistant) is a utility used for creating, configuring and removing
Oracle Databases.
Reference:Creating Oracle Real Application Clusters Databases with Database Configuration
Assistant
Reference:Converting to Oracle RAC and Oracle RAC One Node with DBCA

NO.3 Which two actions do you need to take in Oracle Grid Infrastructure 11g Release 2 to enable
debugging for the resource ora.docrac.vip?
A. Make sure you are logged in as a privileged user.
B. crsctldebug res ora.docrac1.vip:1
C. crsctlset log res ora.docrac1.vip:1
D. crsctldebug log res ora.docrac1.vip:0
Answer: A,C

Oracle덤프   1z0-593최신덤프   1z0-593   1z0-593   1z0-593 dump
Explanation:
A:You can use crsctl commands as the root user to enable dynamic debugging for the Oracle
Clusterware Cluster Ready Services (CRS), Oracle Cluster Registry (OCR), Cluster Synchronization
Services (CSS), and the Event Manager (EVM).
C: You can enable debugging for the CRS, OCR, CSS, and EVM modules and their components by
setting environment variables or by issuing crsctl debug commands using the following syntax:
crsctl debug log module_name component:debugging_level
Reference: Oracle Clusterware Administration and Deployment Guide,Component Level Debugging

NO.4 Select two Clusterware administration tasks that must be performed as the root user.
A. List the location of the voting disks.
B. Check the health and viability of the Clusterware on all nodes.
C. Disable the Clusterware from automatic start at node reboot.
D. Start the Clusterware manually on one node.
E. Check the health of the Clusterware on one node.
Answer: A,D

Oracle dumps   1z0-593 dump   1z0-593덤프   1z0-593덤프
Explanation:
A:Voting disk management requires a valid and working OCR. Before you add, delete, replace, or
restore voting disks, run the ocrcheck command as root.
D: Example:
Restart the Oracle Clusterware stack in normal mode as root:
# crsctl start crs

NO.5 Which step will you have to perform on Windows to restore the OCR that you did not do on
Linux?
A. Identify existing backups with the -backup option
B. Use the Service Control Panel to stop services
C. Review the contents of the backup with the ocrdump command
D. Make sure that the restored OCR files are valid
Answer: B

Oracle   1z0-593 pdf   1z0-593   1z0-593자료   1z0-593덤프   1z0-593 dump
Explanation:
See step 2) below. Restoring the Oracle Cluster Registry on Windows-Based Systems
Use the following procedure to restore the OCR on Windows-based systems:
cluvfy comp ocr -n all [-verbose]
Note:
Restoring the Oracle Cluster Registry on UNIX-Based SystemsUse the following procedure to
restore the OCR on UNIX-based systems:
Repeat this command on each node in your Oracle RAC cluster.
Note:
Prior to running the crsctl start crs command in step 4, run the following command to verify that all
processes except init.cssd fatal are inactive:
ps -ef|grep cssd
Repeat this command on each node in your Oracle RAC cluster.
Reference: Oracle Database Oracle Clusterware and Oracle Real Application Clusters
Administration and Deployment Guide

NO.6 Which two options are checked by the Oracle Universal Installer, when you first install Oracle
Software on a system?
A. if the OFA-compliant path is available
B. oraInst.loc should exist
C. that the user running the installation has permissions to write to the designated path
D. that you are running OUI as a DBA user
Answer: A,B

Oracle   1z0-593   1z0-593
Explanation:
A:
*When installing an OFA-compliant database using Oracle Universal Installer, ORACLE_BASE is
set to /pm/app/oracle by default.
*All Oracle products on CD-ROM are OFA-compliant; that is, Oracle Universal Installer places
Oracle products in directory locations that follow OFA guidelines
B: Every Oracle software installation has an associated Central Inventory where the details of all the
Oracle products installed on a host are registered. The Central Inventory is located in thedirectory
that the inventory pointer file specifies. Each Oracle software installation has its own Central
Inventory pointer file that is unknown to another Oracle software installation.
Default Inventory Pointer File Locations
PlatformDefault Inventory Pointer Location Linux LinuxPPC /etc/oraInst.loc AIX /etc/oraInst.loc
Solaris SPARC HPUX-IA64 HPUX-PARISC /var/opt/oracle/oraInst.loc Windows Windows.X64
Windows.IA64 HKEY_LOCAL_MACHINE/Software/Oracle/inst.loc

NO.7 Once OUI recognizes a set of nodes in a cluster, which three choices does it offer when
installing the Oracle Database 11g Release 2 software?
A. You can only install the Oracle Database with the RAC option on selected nodes.
B. OUI forcesyouto configure ASM for shared storage before proceeding.
C. You can install the Oracle Database as a single instance or with the RAC option on all the nodes.
D. You can install the Oracle Database as a single instance or with the RAC option on selected nodes.
E. You can install Oracle RAC One Node.
Answer: B,D,E

Oracle인증   1z0-593자격증   1z0-593   1z0-593덤프
Explanation:
B, D: Complete the prerequisite tasks for converting to an Oracle RAC database:
Oracle Clusterware and Oracle Database software is installed on all target nodes.
Oracle Clusterware is started.
(D)The Oracle Database binary is enabled for Oracle RAC on all target nodes.
(B) Shared storage is configured and accessible from all nodes.
User equivalency is configured for the operating system user performing the conversion.
Enterprise Manager agents are configured and running on all nodes, and are configured with the
cluster and host information.
The database being converted has been backed up successfully.
E:Installing Oracle RAC One Node is available starting with Oracle Database 11g Release 2
(11.2.0.2).
Note:
*By default, the standard Oracle Database 11g software installation process installs the Oracle
RAC option when OUI recognizes that you are performing the installation on a cluster.

NO.8 The Oracle Cluster Health Monitor can't _________.
A. Detect and analyze OS and duster resource for problems in Oracle Clusterware and RAC cluster
B. Track OS resource consumption at each node, process, and device level continuously
C. Be installed on Windows Server 20O3 SP1
D. Collect and analyze the cluster-wide data
Answer: C

Oracle기출문제   1z0-593시험문제   1z0-593인증   1z0-593   1z0-593
Explanation:
Incorrect: Oracle Cluster Health Monitoris designed to detect and analyze operating system (OS) and
cluster resource related degradation and failures in order to bring more explanatory power to many
issues that occur in clusters where Oracle Clusterware and Oracle RAC are running such as node
eviction. It continuously tracks the OS resource consumption at each node, process, and device level.
It collects and analyzes this cluster-wide data. In real time mode, when thresholds are hit, an alert is
shown to the operator. For root cause analysis, historical data can be replayed to understand what
was happening at the time of failure.

NO.9 Which command lists all the service-related information for the specified service? (crmdb is
the cluster database name and crms is the service name)
A. #crsctl config services -d cmdb -s crms
B. #srvctlconfig service -d cmdb -s crms
C. #srvctl getenv service -d crmdb -s crms
D. #crsctl status service -d crm -s crm -v
Answer: B

Oracle시험문제   1z0-593기출문제   1z0-593자료   1z0-593
Explanation:
*The srvctl config command displays the Oracle Restart configuration of the specified component or
set of components.
*srvctl config service For the specified database, displays the Oracle Restart configuration
information for the specified database service or for all database services
Incorrect: Not C: getenv
Gets and displays environment variables and their values from the Oracle Restart configuration for a
database, listener, or Oracle ASM instance.
srvctl getenv Summary
CommandDescription
*srvctl getenv asm Displays the configured environment variables for the Oracle ASM instance
*srvctl getenv database Displays the configured environment variables for the specified database
instance
*srvctl getenv listener Displays the configuredenvironment variables for the specified listener
Reference:SRVCTL Command Reference for Oracle Restart

NO.10 You are creating an Oracle Cluster database using DBCA. The "Memory size (SGA and PGA)"
field is supplied on value of 2000 MB. The default Block used for the database is __________.
A. 2 KB
B. 4 KB
C. 8 KB
D. 16 KB
E. 32 KB
Answer: C

Oracle pdf   1z0-593자격증   1z0-593   1z0-593
Explanation:
Note: *In the Block Size list, enter the size in bytes or accept the default. Oracle Database data is
stored in these blocks. One data block corresponds to a specific number of bytes of physical space
on disk. While using pre-defined templates, this field is not enabled since the database will be
created with the default block size of 8 KB. But while using the custom option, you can change block
size. Selecting a block size other than the default 8 KB value requires advanced knowledge and
should only be done when absolutely required.

여러분은 먼저 우리 ITExamDump사이트에서 제공되는Oracle인증1z0-593시험덤프의 일부분인 데모를 다운받으셔서 체험해보세요. ITExamDump는 여러분이 한번에Oracle인증1z0-593시험을 패스하도록 하겠습니다. 만약Oracle인증1z0-593시험에서 떨어지셨다고 하면 우리는 덤프비용전액 환불입니다.