IBM 000-371 000-051 000-050 000-007 000-541인증시험을 패스하려면 시험대비자료선택은 필수입니다. 우리ITExamDump에서는 빠른 시일 내에IBM 000-371 000-051 000-050 000-007 000-541관련 자료를 제공할 수 있습니다. ITExamDump의 전문가들은 모두 경험도 많고, 그들이 연구자료는 실제시험의 문제와 답과 거이 일치합니다. ITExamDump 는 인증시험에 참가하는 분들한테 편리를 제공하는 사이트이며,여러분들이 시험패스에 도움을 줄 수 있는 사이트입니다.
IBM 000-371 000-051 000-050 000-007 000-541인증덤프가 ITExamDump전문가들의 끈임 없는 노력 하에 최고의 버전으로 출시되었습니다. 여러분의 꿈을 이루어드리려고 말이죠. IT업계에서 자기만의 자리를 잡고 싶다면IBM 000-371 000-051 000-050 000-007 000-541인증시험이 아주 좋은 자격증입니다. 만약IBM 000-371 000-051 000-050 000-007 000-541인증시험 자격증이 있다면 일에서도 많은 변화가 있을 것입니다, 연봉상승은 물론, 자기자신만의 공간도 넓어집니다.
IT인증자격증은 국제적으로 승인받는 자격증이기에 많이 취득해두시면 취업이나 승진이나 이직이나 모두 편해집니다. 다른 사람이 없는 자격증을 내가 가지고 있다는것은 실력을 증명해주는 수단입니다. IBM인증 000-371 000-051 000-050 000-007 000-541시험은 널리 승인받는 자격증의 시험과목입니다. IBM인증 000-371 000-051 000-050 000-007 000-541덤프로IBM인증 000-371 000-051 000-050 000-007 000-541시험공부를 하시면 시험패스 난이도가 낮아지고 자격증 취득율이 높이 올라갑니다.자격증을 많이 취득하여 취업이나 승진의 문을 두드려 보시면 빈틈없이 닫힌 문도 활짝 열릴것입니다.
ITExamDump에서 출시한 IBM 인증 000-371 000-051 000-050 000-007 000-541시험덤프는ITExamDump의 엘리트한 IT전문가들이 IT인증실제시험문제를 연구하여 제작한 최신버전 덤프입니다. 덤프는 실제시험의 모든 범위를 커버하고 있어 시험통과율이 거의 100%에 달합니다. 제일 빠른 시간내에 덤프에 있는 문제만 잘 이해하고 기억하신다면 시험패스는 문제없습니다.
시험 번호/코드: 000-371
시험 이름: IBM (Web Services Development for IBM WebSphere Application Server V7.0)
시험 번호/코드: 000-051
시험 이름: IBM (Rational Developer for System z v7.6)
시험 번호/코드: 000-050
시험 이름: IBM (Rational Quality Manager v2.0)
시험 번호/코드: 000-007
시험 이름: IBM (IBM Tivoli Netcool/OMNIbus V7.3 Implementation)
시험 번호/코드: 000-541
시험 이름: IBM (DB2 9.7 DBA for Linux UNIX and Windows)
000-541 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-541.html
NO.1 How does the DB2 Server identify the list of GSS-API plug-ins it supports?
A. by using the SRVCON_GSSPLUGIN_LIST database manager configuration
parameter
B. by using the SRVCON_GSSPLUGIN_LIST registry variable
C. by using the SRVSUPP_GSSPLUGIN_LIST database manager configuration
parameter
D. by using the SRVSUPP_GSSPLUGIN_LIST registry variable
Answer: A
IBM dump 000-541 000-541
NO.2 Given the DDL shown below:
CREATE TABLE tab1 (coll SMALLINT );
CREATE VIEW v1 AS SELECT coll FROMtabl WHERE coll > 25 ;
CREATE VIEW V2 AS SELECT COI1 FROM v1 WITH CASCADED CHECK OPTION
CREATE VIEW v3 AS SELECT coll FROM v2 WHERE coll < 100 ;
Which statement will fail?
A. INSERT INTO v2 VALUES (35)
B. INSERT INTO v1 VALUES (5)
C. INSERT INTO v3 VALUES (25)
D. INSERT INTO v3 VALUES (200)
Answer: C
IBM 000-541 000-541 000-541자격증
NO.3 A database administrator takes a full backup of the PRODUCTS database
every Sunday. During the week, two other backups are taken, one on Tuesday
and one on Thursday. The PRODUCTS database is about 800 GB in size, and about
20 percent of the data is modified throughout a week.
Assuming that backup times need to be kept to a minimum, which command should
be used to produce the Tuesday and Thursday backup images?
A. BACKUP DATABASE products TO /mnt/backup
B. BACKUP DATABASE products INCREMENTAL TO /mnt/backup
C. BACKUP DATABASE products TO /mnt/backup UTIL_IMPACT_PRIORITY 10
D. BACKUP DATABASE products INCREMENTAL DELTA TO /mnt/backup
Answer: D
IBM 000-541덤프 000-541 000-541최신덤프
NO.4 Which two plug-in types does the DB2 database system provide? (Choose two.)
A. Group retrieval
B. Kerberos authentication
C. Server authentication
D. Encryption authentication
Answer: A C
IBM dumps 000-541자격증 000-541기출문제 000-541 000-541 000-541
NO.5 Which two can be replicated using HADR? (Choose two.)
A. database configuration changes
B. CREATE TABLE ... NOT LOGGED INITIALLY operations
C. Data Definition Language (DDL) statements
D. LOAD operations
Answer: C D
IBM시험문제 000-541 000-541 000-541
NO.6 Click the Exhibit button.
In the exhibit, where would the authentication of the supplied userid and
password from a remote client take place?
A. AIX operating system
B. LDAP Server
C. Kerberos Server
D. "MyPlugin.so" GSS-API plug-in
Answer: B
IBM pdf 000-541 000-541기출문제
NO.7 Which HADR feature minimizes the impact of software maintenance on the
Standby server?
A. Configure all AUTOMATIC features.
B. Configure all AUTOMATIC maintenance parameters.
C. Configure AUTOMATIC maintenance and perform a rolling upgrade
D. Configure AUTOMATIC maintenance and perform a roll forward.
Answer: C
IBM 000-541 000-541최신덤프 000-541최신덤프
NO.8 BOB and ALICE moved from the DEVELOPER group to the ANALYST group.
As the security administrator, which two commands would remove Bob and Alice
from the DEVELOPER group? (Choose two.)
A. REVOKE ROLE developer FROM bob, alice
B. REVOKE GROUP developer FROM bob, alice
C. REVOKE ROLE developer FROM USER bob, USER alice
D. REVOKE GROUP developer FROM USER bob, USER alice
Answer: A C
IBM 000-541 000-541덤프 000-541 pdf
NO.9 If a non-recoverable database crashes, how can a DBA successfully restart
the database if a table space is damaged and cannot complete crash recovery?
A. The database must be restarted using the RESTART DATABASE command with
the DROP PENDING TABLESPACES option specified. At that point, the database
can be brought on-line and the damaged table space must be dropped and
re-created.
B. The damaged table space must be restored from the latest backup and any
active transaction logs in the log path can then be applied to it using the
TABLESPACE ONLINE option of the ROLLFORWARD DATABASE command. This will bring
the table space on-line and synchronize it with the rest of the database.
C. The damaged table space must be restored from the latest backup image.
Once restored from the backup image, the RESTART DATABASE command can be issued
to apply all the relevant transactions from the active logs. At that point,
the database will come on-line and all table spaces will be synchronized.
D. The damaged table space will require that the entire database be restored
from the latest backup image because the database is non-recoverable and will
not be accessible.
Answer: A
IBM최신덤프 000-541자료 000-541자격증 000-541 pdf
NO.10 Click the Exhibit button
Given the INSERT statements shown below:
INSERT INTO applicant VALUES (1 , ¯ ¡¯ 5 4
INSERT INTO applicant VALUES (2, 'F ¯, 38 )
INSERT INTO applicant VALUES (3, ® ¡¯, 2 1
INSERT INTO applicant VALUES (4, 'F ¯, 91 )
INSERT INTO applicant VALUES (5, 'C ¯, 50 )
INSERT INTO applicant VALUES (6, 'C ¯, 70 )
INSERT INTO applicant VALUES (7, 'C ¯, 95 )
How many rows will be successfully inserted?
A. 1
B. 3
C. 5
D. 7
Answer: C
IBM덤프 000-541 000-541 dump
NO.11 What are three system and database level authorizations available with
DB2? (Choose three.)
A SYSMON
B SYSMNT
C DBCTRL
D SYS ADM
E DBADM
Answer: A D E
IBM 000-541 pdf 000-541 000-541 000-541
NO.12 Which administrative authority is needed to run the audit stored procedures
and table functions such as the AUDIT_DELIM_EXTRACT stored procedure?
A DBADM
B SECADM
C SQLADM
D SYS ADM
Answer: B
IBM 000-541최신덤프 000-541 000-541
NO.13 Due to an application error, some data was deleted from a very large table
residing in table space TS1. The table space was then renamed TS2 before the
error was detected. Rather than try and rebuild this table, it was decided
that database DB1 would be restored and then rolled forward to a point-in-time
(PIT) before the delete operation took place. Unfortunately the PiT roll
forward was done to a time that was too early and some critical transactions
were missing when the database was brought back on-line.
Which steps must be taken to ensure that the critical transactions which are
currently missing from the database are correctly applied to the database
and that table space TS1 is renamed TS2?
A 1. Restore database DB1.
2. Roll forward to the correct point-in-time.
3. Rename TS1 to TS2.
B 1. Restore table space TS1 from the DB1 backup image.
2. Roll forward to the correct point-in-time.
3. Rename table space TS1 to TS2.
4. Re-run the batch processes.
C 1, Restore database DB1
2. Roll forward to end of logs.
D 1. Restore table space TS1 from the DB1 backup image.
2. Roll forward to end of logs.
Answer: A
IBM자격증 000-541기출문제 000-541 000-541
NO.14 A DBA wants to use Label Based Access Control (LBAC) to protect Individual
rows in a table.
Which data type must be used to create a column to hold the necessary LBAC
security data?
A. SYSPR0C.DB2LBACU\BEL
B. SYSPR0C.DB2SECURITYU\BEL
C. SYSIBM .DB2LBACLABEL
D. SYSIBM .DB2SECURITYLABEL
Answer: D
IBM 000-541 000-541 000-541기출문제
NO.15 Which set of procedures will be required to perform a rolling upgrade
in a HADR environment?
A 1. Upgrade the system where the primary database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
B 1. Upgrade the system where the standby database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
C 1. Upgrade the system where the primary database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the new primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
D 1. Upgrade the system where the standby database resides.
2. Issue the TAKEOVER HADR command on the standby database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
Answer: D
IBM기출문제 000-541기출문제 000-541시험문제 000-541시험문제
NO.16 .A database named PAYROLL was backed up on Sunday. On Tuesday, a table space
in the PAYROLL database was renamed from TBSP1 to EMPINFO_TBSP. On Thursday,
the database was restored from the backup image created on Sunday.
Which command must be issued to roll the renamed table space forward to the
current date and time?
A. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbspl)
B. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP
TABLESPACE(empinfo_tbsp)
C. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbsp 1
TO empinfo_tbsp)
D. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbsp 1
RENAME empinfo_tbsp)
Answer: B
IBM 000-541 000-541
NO.17 Click the Exhibit button.
Refer to the logging configuration parameters shown in the exhibit.
What will happen if there are currently 100 active log files and DB2 needs
to create log file 101?
A. At least one application will receive a "log full" error and at least one
transaction will be rolled back because the active log space is full.
B. Log file 101 will go into the OVERFLOWLOGPATH directory since the active
log space is full and infinite logging has been enabled.
C. The database will appear to be hung since the active log space is full
and the BLK_LOG_DSK_FUL parameter is set to YES.
D. Log file 101 will be successfully created in the primary log path since
infinite logging has been enabled. Applications will continue processing
normally.
Answer: D
IBM인증 000-541 000-541 000-541
NO.18 Which statement is correct about informational constraints?
A. An informational constraint can be used by the SQL compiler to improve
the access to data and query performance.
B. The database manager uses an informational constraint to enforce the
uniqueness of the key during changes to the columns of the unique constraint.
C. An informational constraint is a column or combination of columns that
has the same properties as a unique constraint.
D. An informational constraint specifies that every row that is inserted or
updated in the table must conform to the definition of the table.
Answer: A
IBM시험문제 000-541 000-541 dumps 000-541자격증 000-541 pdf
NO.19 Because of an application abend, a database named PAYROLL needs to be
restored to approximately 9:26 am on June 1, 2009. After the database is
restored from a backup image, the command shown below is executed:
ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002
USING LOCAL TIME AND STOP
When this command is executed, the error shown below is generated:
SQL4970N Roll-forward recovery on database "PAYROLL" cannot reach the
specified stop point (end-of-log or point-in-time) because of missing log
file(s) on node(s) "0".
Which two commands could be used to resolve this error? (Choose two.)
A. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP
B. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING UTC TIME
AND STOP
C. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING LOCAL
TIME AND STOP OVERFLOW LOG PATH /mnt/arclog
D. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING UTC TIME
AND STOP NORETRIEVE MISSING RECORDS
Answer: A C
IBM 000-541덤프 000-541 000-541인증
NO.20 What are three authorization categories in DB2? (Choose three.)
A System-level
B Database-level
C Network-level
D Object-level
E Instance-level
Answer: ABD
IBM dumps 000-541 000-541 000-541
댓글 없음:
댓글 쓰기