Microsoft인증70-505시험준비를 하고 계시다면ITExamDump에서 출시한Microsoft인증70-505덤프를 제일 먼저 추천해드리고 싶습니다. ITExamDump제품은 여러분들이 제일 간편한 방법으로 시험에서 고득점을 받을수 있도록 도와드리는 시험동반자입니다. Microsoft인증70-505시험패는ITExamDump제품으로 고고고!
Microsoft인증 70-505시험을 등록했는데 마땅한 공부자료가 없어 고민중이시라면ITExamDump의Microsoft인증 70-505덤프를 추천해드립니다. ITExamDump의Microsoft인증 70-505덤프는 거의 모든 시험문제를 커버하고 있어 시험패스율이 100%입니다. ITExamDump제품을 선택하시면 어려운 시험공부도 한결 가벼워집니다.
시험 번호/코드: 70-505
시험 이름: Microsoft (TS: Microsoft .NET Framework 3.5,Windows Forms Application Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 103 문항
업데이트: 2014-04-24
Microsoft인증70-505시험의자격증은 여러분에 많은 도움이 되리라 믿습니다. 하시는 일에서 한층 더 업그레이드될 것이고 생활에서도 분명히 많은 도움이 될 것입니다. 자격증취득 즉 재산을 얻었죠.Microsoft인증70-505시험은 여러분이 it지식테스트시험입니다. ITExamDump에서는 여러분의 편리를 위하여 ITExamDump만의 최고의 최신의Microsoft 70-505덤프를 추천합니다. ITExamDump를 선택은 여러분이 최고의 선택입니다. ITExamDump는 제일 전면적인Microsoft 70-505인증시험자료의 문제와 답을 가지고 잇습니다.
수많은Microsoft인증 70-505시험공부자료중에서ITExamDump의Microsoft인증 70-505덤프가 가장 출중한 원인은 무엇일가요? ITExamDump의Microsoft인증 70-505덤프는 실제시험문제의 출제방향을 연구하여 IT전문가로 되어있는 덤프제작팀이 만든 최신버전 덤프입니다. ITExamDump의Microsoft인증 70-505덤프가 있으면 힘든Microsoft인증 70-505시험이 쉬어져서 자격증을 제일 빠른 시간내에 취득할수 있습니다.제일 어려운 시험을 제일 간단한 방법으로 패스하는 방법은ITExamDump의Microsoft인증 70-505덤프로 시험준비 공부를 하는것입니다.
ITExamDump의 Microsoft 인증 70-505시험덤프공부자료는 pdf버전과 소프트웨어버전 두가지 버전으로 제공되는데 Microsoft 인증 70-505실제시험예상문제가 포함되어있습니다.덤프의 예상문제는 Microsoft 인증 70-505실제시험의 대부분 문제를 적중하여 높은 통과율과 점유율을 자랑하고 있습니다. ITExamDump의 Microsoft 인증 70-505덤프를 선택하시면 IT자격증 취득에 더할것 없는 힘이 될것입니다.
Microsoft인증70-505시험을 패스함으로 취업에는 많은 도움이 됩니다. ITExamDump는Microsoft인증70-505시험패스로 꿈을 이루어주는 사이트입니다. 우리는Microsoft인증70-505시험의 문제와 답은 아주 좋은 학습자료로도 충분한 문제집입니다. 여러분이 안전하게 간단하게Microsoft인증70-505시험을 응시할 수 있는 자료입니다.
70-505 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-505.html
NO.1 You are creating a Windows Forms application for the design of circuit boards and electronic equipment.
You use the .NET Framework 3.5 to create the application x that allows designers to preview designs
before printing them.
The previewed documents must meet the following requirements:
- The graphics and text are displayed clearly
- The fullscale preview is set as default for the documents
- The zoom setting of the preview control is adjusted automatically when the form is resized
You need to ensure that the requirements are met when the form that contains the custom print preview
control is displayed.
Which code segment should you use?
A. printPreviewControl1.UseAntiAlias = true ;
printPreviewControl1.AutoZoom = true ;
printPreviewControl1.Zoom = 1.0 ;
B. printPreviewControl1.UseAntiAlias = true ;
printPreviewControl1.AutoZoom = true ;
printPreviewControl1.Zoom = 100.0 ;
C. printPreviewControl1.UseAntiAlias = true ;
printPreviewControl1.AutoZoom = false ;
printPreviewControl1.Zoom = 1.0 ;
D. printPreviewControl1.UseAntiAlias = false ;
printPreviewControl1.AutoZoom = false ;
printPreviewControl1.Zoom = 100.0;
Answer: A
Microsoft최신덤프 70-505 70-505 70-505 70-505
NO.2 You are creating a Windows Forms application by using the .NET Framework 3.5 The application is
used by a financial service provider.
You discover that the service provider transfers large amounts of data by using XML.
You need to read and validate the XMLdocuments in the most time efficient manner.
Which technology should you use?
A. The XmlReader class
B. The XmlDocument class
C. The XmlResolver class
D. The LINQ to XML method
Answer: A
Microsoft dump 70-505 pdf 70-505
NO.3 You are creating a Windows Forms application for a courier company by using the .NET Framework 3.5.
You create a form that allows customers to track the progress of their shipments.
The form contains the following elements:
- A text box named txtTN that allows users to enter a tracking number
- An ErrorProvider control named ErrorProvider1 that informs users of an invalid tracking number
- A function named ValidTrackingNumber that validates tracking numbers
You need to ensure that the txtTN text box is validated, which code segment should you use?
A. private void txtTN_Validating(object sender, CancelEventArgs e) {
if (!ValidTrackingNumber(txtTN.Text)){
errorProvider1.SetError(txtTN, "InvalidTracking Number")
e.Cancel = true;
}
else
errorProvider1.SetError(txtTN, "")
}
B. private void txtTN_Validating(object sender, CancelEventArgs e){
if (!ValidTrackingNumber(txtTN.Text))
errorProvider1.SetError(txtTN, "Invalid Tracking Number")
else{
errorProvider1.SetError(txtTN, "")
e.Cancel = true
}
}
C. private void txtTN_Validated(object sender, EventArgs e){
if (!ValidTrackingNumber(txtTN.Text))
errorProvider1.SetError(txtTN, "Invalid Tracking Number")
else{
errorProvider1.SetError(txtTN, "")
txtTN.Focus()
}
}
D. private void txtTN_Validated(object sender, EventArgs e){
if (!ValidTrackingNumber(txtTN.Text))
{
errorProvider1.SetError(txtTN, "InvalidTracking Number")
txtTN.Focus()
}
else
errorProvider1.SetError(txtTN, "")
}
Answer: A
Microsoft dumps 70-505덤프 70-505
NO.4 You are creating a Windows application by using the .NET Framework 3.5.
You add a BackgroundWorker component to a Windows form to handle a timeconsuming operation.
You add a Cancel button to the form.
You need to ensure that when the Cancel button is pressed, the background task is cancelled.
What should you do?
A. Set the DoWorkEventArgs.Cancel property to False in the DoWork event handler of
BackgroundWorker.
B. Call the BackgroundWorker.CancelAsync() method from the OnClick event handler of the Cancel
button.
C. Call the BackgroundWorker.CancelAsync() method from the DoWork event handler of the
BackgroundWorker.
D. Stop the process in the OnClick event handler of the Cancel button if the
BackgroundWorker.CancellationPending property is True.
Answer: B
Microsoft 70-505 70-505최신덤프 70-505기출문제 70-505기출문제
NO.5 You are creating a Windows Forms application by using the .NET Framework 3.5.
The application stores a list of part numbers in an integer based array as shown in the following code
segment (Line numbers are included for reference only)
01 var parts = new int[]
02 { 105, 110, 110, 235, 105, 03 135, 137, 205, 105, 100, 100 } ;
03
04
05 foreach (var item in results) {
06 tbResults.Text.+= item + "\r\n";
07 }
You need to use a LINQ to Objects query to perform the following tasks:
- Obtain a list of duplicate part numbers
- Order the list by part numbers
- Provide the part numbers and the total count of part numbers in the results
Which code segment should you insert at line 04 ?
A. var results = (from n in parts orderby n group n by n into n1 select new { n1.Key, count = n1.Count() })
Distinct();
B. var results = (from n in parts group n by n into n1 where n1.Count() > 1 orderby n1 select new
{ n1.Key, count = n1.Count() });
C. var results = (from n in parts orderby n group n by n into n1 where n1.Count() > 1 select n1);
D. var results = (from n in parts orderby n group n by n into n1 where n1.Count() > 1 select new { n1.Key,
count = n1.Count() });
Answer: D
Microsoft 70-505 70-505
NO.6 You are creating a Windows Forms application by using the .NET Framework 3.5.
The application is configured to use rolebased security.
You need to ensure that users can print reports only by selecting a printer from the printer dialog box.
You want to achieve this goal by using the minimum level of permission.
Which code segment should you use?
A. [System.Drawing.Printing.PrintingPermission (System.Security.Permissions.SecurityAction.Demand,
Level=System.Drawing.Printing.PrintingPermissionLevel.AllPrinting)];
B. [System.Drawing.Printing.PrintingPermission (System.Security.Permissions.SecurityAction.Demand,
Level=System.Drawing.Printing.PrintingPermissionLevel.NoPrinting)];
C. [System.Drawing.Printing.PrintingPermission (System.Security.Permissions.SecurityAction.Demand,
Level=System.Drawing.Printing.PrintingPermissionLevel.DefaultPrinting)];
D. [System.Drawing.Printing.PrintingPermission (System.Security.Permissions.SecurityAction.Demand,
Level=System.Drawing.Printing.PrintingPermissionLevel.SafePrinting)];
Answer: D
Microsoft시험문제 70-505최신덤프 70-505시험문제
NO.7 You are creating a Windows application by using the .NET Framework 3.5.
You plan to create a form that might result in a timeconsuming operation.
You use the QueueUserWorkItem method and a Label control named lblResult.
You need to update the users by using the lblResult control when the process has completed the
operation.
Which code segment should you use?
A. private void DoWork(object myParameter){
// thread work
this.Invoke(new MethodInvoker(ReportProgress)) ;
}
private void ReportProgress();{
this.lblResult.Text = "Finished Thread";
}
B. private void DoWork(object myParameter){
// thread work
this.lblResult.Text = "Finished.Thread";
}
C. private void DoWork(object myParameter){
// thread work
System.Threading.Monitor.Enter(this);
this.lblResult.Text = "Finished.Thread";
System.Threading.Monitor.Exit(this);
}
D. private void DoWork(object myParameter){
// thread work
System.Threading.Monitor.TryEnter(this);
ReportProgress();
}
private void ReportProgress(){
this.lblResult Text = "Finished.Thread";
}
Answer: A
Microsoft자격증 70-505 70-505자료 70-505
NO.8 You are creating a Windows Forms application that has the print functionality by using the .NET
Framework 3.5.
You implement the PrintPage page event for the form.
You associate an instance of the PrintDocument control along with an instance of the PrintPreviewDialog
control named prevDialog1.
You want to set the default size of the PrintPreviewDialog class to full screen.
You need to provide a print preview for the user by adding a code segment to the Click event of the button
on the form.
Which code segment should you use.?
A. prevDialog1.Width = Screen.PrimaryScreen.Bounds.Width;
prevDialog1.Height = Screen.PrimaryScreen.Bounds.Height;
prevDialog1.ShowDialog() ;
B. prevDialog1.Width = 1024 ;
prevDialog1.Height = 768 ;
prevDialog1.ShowDialog() ;
C. prevDialog1.Width = prevDialog1.PrintPreviewControl.Width ;
prevDialog1.Height.= prevDialog1.PrintPreviewControl.Height;
prevDialog1.ShowDialog() ;
D. prevDialog1.Width = prevDialog1.PrintPreviewControl.Width ;
prevDialog1.Height.= prevDialog1.PrintPreviewControl.Height;
prevDialog1.Update();
Answer: A
Microsoft 70-505 70-505 dumps 70-505기출문제 70-505
NO.9 You are creating a Windows Forms application by using the .NET Framework 3.5.
You use LINQ expressions to read a list of customers from the following XML file.
<customers>
<customer id="135" birthDate="4/1/1968"> Paul Koch </customer>
<customer id="122" birthDate="7/5/1988"> Bob Kelly </customer>
<customer id="044" birthDate="3/24/1990"> Joe Healy </customer>
<customer id="982" birthDate="9/15/1974"> Matt Hink </customer>
<customer id="325" birthDate="1/7/2004"> Tom Perham </customer>
<customer id="134" birthDate="9/23/1946"> Jeff Hay </customer>
<customer id="653" birthDate="5/15/1947"> Kim Shane </customer>
<customer id="235" birthDate="4/24/1979"> Mike Ray </customer>
</customers>
You need to obtain a list of names of customers who are 21 years of age or older.
Which code segment should you use ?
A. XDocument customers = XDocument.Load("Customers.xml");
var results = from c in customers.Descendants("customer") where
((DateTime)c.Attribute("birthDate")).AddYears(21)< DateTime.Now select.c.Attribute("Name") ;
B. XDocument customers = XDocument.Load("Customers.xml");
var results = from c in customers.Descendants("customer") where
((DateTime)c.Attribute("birthDate")).AddYears(21)< DateTime.Now select new { FullName = c.Value } ;
C. XDocument customers = XDocument.Load("Customers.xml");
var results = from c in customers.Descendants("customer") where
((DateTime)c.Attribute("birthDate")).AddYears(21)< DateTime.Now select c.Element("customer") ;
D. XDocument customers = XDocument.Load("Customers.xml")
var results = from c in customers.Descendants() where ((DateTime)c.Attribute("birthDate")).AddYears(21)
< DateTime.Now select new { FullName = c.Value};
Answer: B
Microsoft자료 70-505시험문제 70-505최신덤프
NO.10 You are creating a Windows application for graphical image processing by using the .NET Framework
3.5.
You create an image processing function and a delegate.
You plan to invoke the image processing function by using the delegate.
You need to ensure that the calling thread meets the following requirements:
- It is not blocked when the delegate is running
- It is notified when the delegate is complete
What should you do?
A. Call the Invoke method of the delegate.
B. Call the BeginInvoke and EndInvoke methods of the delegate in the calling thread.
C. Call the BeginInvoke method by specifying a callback method to be executed when the delegate is
complete Call the EndInvoke method in the callback method.
D. Call the BeginInvoke method by specifying a callback method to be executed when the delegate is
complete Call the EndInvoke method of the delegate in the calling thread.
Answer: C
Microsoft덤프 70-505인증 70-505
NO.11 You are creating a Windows Forms application by using the .NET Framework 3.5.
You have implemented the PrintPage event to send the page output to the printer.
The users must select the printer and the page range before printing.
You need to ensure that users can print the content of the form by clicking the button control.
Which code segment should you use?
A. PageSetupDialog pageSetupDialog1 = new PageSetupDialog() ;
pageSetupDialog1.Document = printDocument1 ;
DialogResult result = pageSetupDialog1.ShowDialog() ;
if(result == DialogResult.OK)
{
printDocument1.Print();
}
B. PageSetupDialog pageSetupDialog1 = new PageSetupDialog();
pageSetupDialog1.Document = printDocument1;
DialogResult result = pageSetupDialog1.ShowDialog();
if (result == DialogResult.Yes)
{
printDocument1.Print();
}
C. PrintDialog printDialog1 = new PrintDialog();
printDialog1.AllowSomePages = true;
printDialog1.Document = printDocument1;
DialogResult result = printDialog1.ShowDialog();
if (result == DialogResult.OK)
{
printDocument1.Print();
}
D. PrintDialog printDialog1 = new PrintDialog();
printDialog1.AllowSomePages = true;
printDialog1.Document = printDocument1;
DialogResult result = printDialog1.ShowDialog();
if (result == DialogResult.Yes)
{
printDocument1.Print();
}
Answer: C
Microsoft기출문제 70-505자료 70-505 70-505자료 70-505덤프
NO.12 You are creating a Windows Forms application by using the .NET Framework 3.5.
You plan to deploy the application in multiple countries and languages.
You need to ensure that the application meets the globalization requirements.
Which two actions should you perform (Each correct answer presents part of the solution, choose two )?
A. Handle server names and URLs as ASCII data
B. Use Unicode strings throughout the application
C. Use the NumberFormatInfo class for numeric formatting
D. Handle strings as a series of individual characters instead of entire strings
E. Avoid usage of the SortKey class and the CompareInfo class for sorting purposes
Answer: BC
Microsoft기출문제 70-505 dumps 70-505 pdf 70-505 70-505 dumps
NO.13 You are creating a Windows Forms application by using the .NET Framework 3.5.
You have resource files in five different languages.
You need to test the application in each language.
What should you do?
A. Set the CurrentCulture property explicitly to the respective culture for each language.
B. Set the CurrentCulture property explicitly to IsNeutralCulture for each language.
C. Set the CurrentUICulture property explicitly to IsNeutralCulture for each language.
D. Set the CurrentUICulture property explicitly to the respective culture for each language.
Answer: D
Microsoft 70-505 70-505 70-505
NO.14 You are creating a Windows Forms application by using the .NET Framework 3.5.
You create a new form in your application.
You add a PrintDocument control named pntDoc to the form.
To support the print functionality, you write the following code segment in the application
(Line numbers are included for reference only.)
01 pntDoc.BeginPrint += new.PrintEventHandler(PrintDoc_BeginPrint) ;
02
03 bool.canPrint = CheckPrintAccessControl() ;
04 if (!canPrint) {
05
06 }
07
You need to ensure that the following requirements are met:
- When the user has no print access, font and file stream initializations are not executed and the print
operation is cancelled
- Print operations are logged whether or not the user has print access
What should you do ?
A. Add the following code segment at line 05
pntDoc.BeginPrint -= new PrintEventHandler(PrintDoc_BeginPrint);
pntDoc.BeginPrint += new PrintEventHandler((obj, args) => args.Cancel = true);
Add the following code segment at line 07
pntDoc.BeginPrint += new PrintEventHandler((obj1, args1) => LogPrintOperation());
B. Add the following code segment at line 05
pntDoc.BeginPrint += new PrintEventHandler(delegate(object.obj, PrintEventArgs.args){});
Add the following code segment at line 07
pntDoc.BeginPrint -= new PrintEventHandler(PrintDoc_BeginPrint);
pntDoc.BeginPrint += new PrintEventHandler((obj1, args1) => LogPrintOperation());
C. Add the following code segment at line 05
pntDoc.BeginPrint -= new PrintEventHandler(PrintDoc_BeginPrint);
pntDoc.BeginPrint -= new PrintEventHandler(delegate(object.obj, PrintEventArgs.args){});
Add the following code segment at line 07
pntDoc.BeginPrint -= new PrintEventHandler((obj1, args1) => LogPrintOperation());
D. Add the following code segment at line 05
pntDoc.BeginPrint += new PrintEventHandler((obj, args) => args.Cancel = true);
Add the following code segment at line 07
pntDoc.BeginPrint += new PrintEventHandler(PrintDoc_BeginPrint);
pntDoc.BeginPrint -= new PrintEventHandler((obj1, args1) => LogPrintOperation());
Answer: A
Microsoft기출문제 70-505 70-505 70-505자격증 70-505
NO.15 You are creating a Windows Forms application by using the .NET Framework 3.5.
The application requires a thread that accepts a single integer parameter.
You write the following code segment (Line numbers are included for reference only.)
01 Thread myThread = new Thread(new ParameterizedThreadStart(DoWork)) ;
02 myThread.Start(100);
03
You need to declare the method signature of the DoWork method.
Which method signature should you use?
A. public void DoWork();
B. public void DoWork(int nCounter);
C. public void DoWork(object oCounter);
D. public void DoWork(Delegate oCounter);
Answer: C
Microsoft 70-505 70-505자격증 70-505
ITexamdump의 074-409덤프의 VCE테스트프로그램과 648-375덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1z0-481시험에 대비한 고품질 덤프와 HP3-C29시험 최신버전덤프를 제공해드립니다. 최고품질 000-156시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기